Harmonic-resolution-systems HRS Analog Disk User Manual download pdf

HARMONIC RESOLUTION SYSTEMS

ANALOG DISK

Introduction

Thank you for purchasing the Harmonic Resolution Systems (HRS) Analog Disk record clamp. When used

properly, it will give you many years of superior musical signal reproduction. The HRS Analog Disk is designed to

significantly reduce the negative impact of air and structure borne vibration on your record playback accuracy.

The HRS Analog Disk is also a perfect match for the HRS Isolation Base. While the Analog Disk significantly

reduces air-borne, record, and turntable generated vibration, the HRS Isolation Bases or Rack System significantly

reduce the amount of structure-borne vibration that reaches the turntable from the surrounding environment.

Warnings:

The Analog Disk is designed for use on tangential arm turntables with a solid (non-threaded) spindle. When

the record is finished playing the cartridge should not come in contact with the Analog Disk. Prior to use, the

Analog Disk you should be checked to make sure there is no interference with your particular turntable

configuration at the end of record play. If there is interference then the Analog Disk should not be used as it

may result in undesired damage to the stylus or cartridge.

Use and Instructions

The Analog Disk is designed for use on tangential arm turntables with a solid (non-threaded) spindle. Check the

fit of the center hole of the Analog Disk on your turntable spindle. It is intentionally design for a snug contact fit

with the spindle. With a slight push and twist the custom polymer surface of the Analog Disk should come in direct

contact with the album and remain in contact once pressure is removed. If you find that the Analog Disk grips

your spindle then place a very small amount of dish soap or oil, using a Q-tip or tissue, at the entrance to the

spindle hole in the Analog Disk. This will allow the Analog Disk to slide freely with slight pressure onto the spindle

and establish proper contact with the record surface. Repeat lubrication as necessary to ensure optimum

performance.

Care and Maintenance

The HRS Analog Disk is a very low maintenance item that will provide many years of trouble free performance by

applying these basic care instructions.

Clean the Analog Disk using a lint-free soft (non-abrasive) cloth. Use a damp cloth with water or mild soap if

required. Do not spray with or immerse in water.

1 2

Summary of Contents

Page 1 - Warnings:

HARMONIC RESOLUTION SYSTEMSANALOG DISKIntroductionThank you for purchasing the Harmonic Resolution Systems (HRS) Analog Disk record clamp. When usedpr

Page 2 - Warranty

Warnings!Do not use an abrasive cleaner or abrasive sponge to clean the Nimbus, as they may scratch the metallic surface.Do not wash with any solvent

Comments to this Manuals

No comments

Harmonic-resolution-systems HRS Analog Disk User Manual

Browse online or download User Manual for Audio Harmonic-resolution-systems HRS Analog Disk. Harmonic Resolution Systems HRS Analog Disk User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio Harmonic-resolution-systems HRS Analog Disk